wavlink router setup

 Trying to perform the wavlink router setup using wifi.wavlink.com? Need help in setting up wavlink AC1200? If yes, then we can help you through this guide. This guide will tell you how to access the wavlink login page using the web address wifi.wavlink.com and how to do the wavlink ac1200 setup.

What is wifi.wavlink.com?

Wifi.wavlink.com is the default web domain that helps in login, setup, and configure wavlink devices. You just need to connect your computer to the wavlink network to access the wifi.wavlink.com login page. After signing in, you can begin with the setup and configuration of your device. To know the process in detail, you can go through the following sections and read the stepwise instructions. 

Wavlink router login

Use the web interface for wavlink router login. The web based utility can be used in any device or browser. Here’s how to do wavlink router login.

Connect a laptop to wavlink router via an Ethernet cable or wirelessly.

Visit wifi.wavlink.com on the connected device. 

Wait for the wavlink login window to show up.

Provide the necessary details.

Click on ‘Login’ and complete the wavlink login process.

http://wifi.wavlink.com

The web address wifi.wavlink.com takes you to the wavlink login page. You just need to keep one thing in mind that the web address will only work if you have connected your computer to the wavlink network. 

Follow these steps to login to the wavlink device. 

On a computer, open up a web browser of your choice.

Type wifi.wavlink.com in the address bar; click enter.

Now, the wavlink router login screen will open.

Enter the username and password for your router.

This will give you access to the wavlink router setup page.

Wavlink router login details

To set up wavlink router for the first time, it is necessary to enter some login information on the login page. Use the following credentials to sign into wavlink device.

Web address- www.wifi.wavlink.com

Ip address- 192.168.10.1

Username- admin

Password- admin

Wavlink ac1200 access point setup

Once you’re done with the physical connection and wavlink ac1200 login process it’s time to start the installation process. Go through these easy and simple steps:

You will reach onto the wavlink ac1200 setup page. 

Select your country/ region and time-zone from the drop-down menu.

Enter the new login password for your web-interface page.

Select the working mode as the ‘Access Point’ and follow the on-screen instructions.

Choose the wireless network of the main router that you wish to extend.

Provide the same wifi password of your outdoor extender as the wifi password of your main router.

Wait for the setting to apply. This may take a while.

Once done, find the wireless network name of your outdoor ap and connect to it using its wifi password.

Finally, your wavlink ac1200 outdoor extender setup is now completed. Now, you can install the device wherever you want. 

Conclusion

By following the steps mentioned in this blog you can easily configure the wavlink device via wifi.wavlink.com. In case you're encountering issues, get back to us. Our technicians will help you with it. We are available 24/7 for your help.